The Taylor-Dunn MX-600 is a product solution designed to move a repairman, tool chest, and workbench to down equipment in less than one third of the time required by conventional methods.

> Download Brochure
> See More Videos    Compare This Model Request A Quote
Speed9 mph (14.4 km/h)
Range20 miles (32 km)
Load Capacity600 lbs. (272 kg)
Tow Capacity2,000 lbs. (909 kg)

The MX-600 improves repair and maintenance productivity by reducing the time to each equipment to be serviced and providing a mobile work shop at the service site.

Equipped with 24-volt battery system, the MX-600 can travel at speeds of 9 mph. An all welded steel unitized body and frame is built to last for years of use. The modularized control system design provides ease of maintenance on all electrical systems. Safety loop tiller steering protects the driver, and a solid state controller and hall effect accelerator module provide safe acceleration during daily operation.

Speed9 mph (14.4 km/h)
Range20 miles (32 km)
Load Capacity600 lbs. (272 kg)
Tow Capacity2,000 lbs. (909 kg)
Weight890 lbs. (404 kg.)
Length86" (218 cm)
Width32" (81 cm)
HeightLess Cab: 40" (102 cm)
With Cab: N/A
Hitch HeightN/A
Outside Turning Radius81" (205.1cm)
Wheel Base55.5" (140.0cm)
DeckWidth: 30" (76.2cm)
Length: 27" (68.6cm)
Height: 36" (91.4cm)
Frame ConstructionAll steel unitized body, heavy duty 14 gauge smooth plate
PowertrainType: Electric
Power: 110/220V, 50/60Hz
Transmission: Transaxle Assembly, Sealed Helical Gear Reduction
Drive: Direct Drive
Controller: Solid State Speed Control
BatteryType: Four 210 amp hr., 6 volt (lead acid)
System Voltage: 24
Charger: Portable, 25 Amp, SCR Control
BrakesRear: Two wheel mechanical drum with brake light
Front: N/A
Parking: Foot Operated
SteeringManual, Tiller, Front Fork
TiresRear: 4.80 x 8 pneumatic
Front: 4.80 x 8 Load Range B, Pneumatic
SeatsDriver: Seat Cushion with Full Backrest
Passenger: N/A
InstrumentationBattery status indicator, forward/reverse selector, key switch, reverse buzzer and electric horn
- Lockable Tool Box
- Weld Tank Compartment
- Tool Cabinet
- Work Bench
- Vise

Note: Click image to view full size.

The following custom vehicles are based on the MX-600:

Taylor-Dunn Custom Vehicle Model 198944Custom Vehicle ID: 198944
This custom MX-600 includes steel cab with windshield, snap on roll down enclosure with zippered access, snap on vinyl at rear window, strobe light on roof, headlight and taillight, 2 inch ball hitch at rear and painted White.
Taylor-Dunn Custom Vehicle Model 194447Custom Vehicle ID: 194447
This MX-600 has been customized with a steel cab, snap securing enclosure with side zippers, 5-drawer tool chest, strobe light, front headlight, tail light, hour meter, reverse alarm, and two-inch ball hitch.

* Vehicle specifications subject to change without notice.